Quoizel TVN232DK Tavern - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of6
Assembly Instruction Sheet #IS-TVN232DK
For Style TVN232DK
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2013 QuoizelInc.
Figure 3
STEP 3 Assemble Ceiling Canopy -
A. Pass the Supply Wires and Ground Wires through Swivel
with Nipple, the Ceiling Canopy, Reinforcing Plate, Lock
Washers and Hex Nuts.
B. Screw Swivels into the top end of the Upper Rod. Hand
tighten until snug.
C. Pass the Ceiling Canopy over the top ends of the Swivel .
Place Reinforcing Plate and Lock Washers over one
Swivel and secure with Hex Nuts. Tighten until snug.
Lock Washer
Hex Nut
Reinforcing
Plate
Ceiling
Canopy
Swivel
Upper Rod
Supply Wire
and Ground
Wire
STEP 4 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Outlet Box
Screw (not
Supplied)
Figure 4
Crossbar
Outlet Box
Mounting
Hole
Figure 5
STEP 5 Attach Nipple to Crossbar -
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Nipple
Crossbar
Lock Washer
Hex Nut
June2013