Quoizel TY1504AN Taylor - Manual (Page 3)

2 OF 3
INSTALLATION INSTRUCTIONS
STEP 5:
a. Place the Ceiling Canopy over the Mounting Screws
and secure with the Mounting Balls. Hand-tighten until
snug.
STEP 6:
a. Place the Shade and the Steel Collar over the Socket
as shown. Secure by threading the Socket Collar onto
the Socket. Hand-tighten until snug.
STEP 7 :
. . .
a. Install the correct Bulb referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now Restore electricity Retain this sheet for future reference
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
STEP 4:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (Black or Smooth Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
Use Wire Connectors (not supplied) to connect the
wires.
STYLE NUMBER: TY1504AN, TY1504WT
Mounting Screw
Ceiling Canopy
Outlet Box
Mounting Ball
Socket
Shade
Socket Collar
Steel Collar