Quoizel TF1507VB Pomez - Manual (Page 2)

STEP 1 :
. a Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread 12 Rods with Nipples 6
Rod with Nipple, 6 Rod and Socket Assembly together
as shown. Tighten until snug.
" , "
"
6” Rod with
Nipple
6” Rod
Supply Wires with
Ground Wire
Socket Assembly
STEP 2 :
.
. "
a Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
b Thread the Swivel onto the top end of the 6 Rod and hand
tighten until snug.
Swivel
Ceiling Canopy
Supply Wire with
Ground Wire
6 Rod "
STEP 3:
a Screw the Mounting Screws into the Crossbar place the
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown
Secure
the position of the Mounting Screws by tightening the Hex
Nuts against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
Screws
. ,
.
.
.
.
Outlet Box
Crossbar
Mounting Screw
Hex Nut
Outlet Box Screw
Lock Washer
STEP 4 :
* ( ) .
.
.
( )
. ( )
( ) .
.
.
Use Wire Connectors not supplied to connect the wires
a Connect the House Ground Wire to the Fixture Ground
Wire.
b Connect the House White Wire to the Fixture Supply Wire
White or Ribbed Side .
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box
WHITE WIRE
BLACK OR RED WIRE ( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
2 OF 3
INSTALLATION INSTRUCTIONS
12” Rod
with Nipple
12” Rod
with Nipple
STYLE NUMBER TF1507VB,TFFS1507VB :