Quoizel UPMM5005IS Uptown Madison Manor - Manual (Page 8)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
8of8
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
STEP 13 - Attach Shade to Fixture Body
A. Place the Diffuser (M) and the Steel Collar (Q) over the
Socket as shown. Thread the Socket Collar (P) onto the
Socket to secure the Diffuser (M). Hand tighten until
snug.
B. Place the shade onto the Diffuser properly. (L) (M)
Assembly Instruction Sheet #IS-UPMM5005IS
For Style UPMM5005IS
Shade
Socket Collar
Diffuser
Fixture
Assembly
Bulb Shield
G9 Bulb
Sandblast
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2012 QuoizelInc. December2012
Figure 15
Figure 14
Steel Collar
STEP 14 Install Bulb and Bulb Shield -
A. This fixture uses Frosted G9 Halogen Bulbs. Maximum 75
watts.
B. Insert bulb and seat properly into place.
C. Screw Bulb Shield (Q) onto the Socket and hand tighten
until snug.
Do not touch the bulb with bare hands use a
cloth or glove.
Your lamp wall fixture is now assembled and ready to use.
Enjoy!
IMPORTANT: