Quoizel UPMM5005IS Uptown Madison Manor - Manual (Page 5)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
5of8
Figure 7
STEP 7 Attach Nipple to Crossbar -
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Nipple
Crossbar
Lock Washer
Hex Nut
STEP 6 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Outlet Box
Screw (not
Supplied)
Figure 6
Crossbar
Outlet Box
Mounting
Hole
STEP 5 Assemble to Upper Rod - Fixture Loop
A. Pass Supply Wires and Ground Wire through the Fixture
Loop (G) then thread the Fixture Loop (G) and the Upper
Rod together. Hand tighten until snug.
Fixture Loop
Upper Rod
Supply Wire and
Ground Wire
Figure 5
Assembly Instruction Sheet #IS-UPMM5005IS
For Style UPMM5005IS
6” Rod
12” Rod
12” Rod
6” Rod
Fixture
Assembly
Supply Wire and
Ground Wire
STEP 4 Assemble Rods -
A. Determine the Rods (J/K) to be assembled to the Fixture
Assembly (O) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (J/K) and then thread the chosen Rods (J/K) and the
Fixture Assembly (O) together. Hand tighten until snug.
Figure 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2012 QuoizelInc. December2012