Quoizel TFSM1818VB Samara User Manual
Page 2
GND
2.4mm
13Ga
QUOIZEL
R
2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2014 QuoizelInc.
August2014
STEP 4
Install Crossbar
-
.
.
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included)
Tighten until snug
Figure 4
Outlet Box
Outlet Box Screw
(not included)
Green Ground Screw
AA
White wire
from supply
Ribbed side wire
from fixture
Black wire from
supply (or Red)
Smooth side wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 5
STEP 5 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Twist
connectors until wires are tightly joined together. Wrap each
connection with approved electrical tape and carefully stuff all the
connected wires into the Outlet Box.
STEP 6
Attach Fixture Body to Mounting Screw
-
A. Place the Backplate of the Fixture Body (A) over the Mounting
Screws and secure with Lock Ball (B). Hand tighten until snug.
Figure 6
A
B
Mounting Screw
STEP 7
Install Bulb
-
A. This fixture uses standard bulb with
medium screw base. Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready
to use. Enjoy!
Socket
Bulb
Figure 7
TFSM1818VB
PART NUMBER
G3879PA
G3878PA
9112EXVB
9106EXVB
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/2
"
REPLACEMENT PART
GLASS PANEL
GLASS PANEL
12” ROD
6” ROD
REQ.
4
4
2
2
NO.
(3) 100W
Bulbs
(Not Supplied)
Medium
Base
1
FINISH: VINTAGE BRONZE
18” Sq.
13.5”
10”
59.5”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS AND 2 QUICK LINKS
1”
6” Sq.
Suggested rods for Ceiling height :
8’ ceiling : use (1) 12” rod with connector (F) and (1) connector (K)
9’ ceiling : use (1) 12” rod (E) and (1) 12” rods with connector (F)
10’ ceiling: use (1) 6” rod with connector (C), (1) 6” rod (D), (1) 12”
rod (E) and (1) 12” rods with connector (F)
2
3
4
1
2
3
4