Quoizel RBN2823MN Ribbons - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2014 QuoizelInc. June2014
Assembly Instruction Sheet #IS-RBN2823MN
For Style RBN2823MN
Bulb
Stem
Trimming
Rubber Washer
Lock
Ball
Rubber Washer
STEP 6
- Install Trimming to Fixture
A. Thread the Short Nipple end of Stem (E) into the Fixture
Body (C), hand tighten until snug.
B. Place the Trimming (F) and Rubber Washer (G) over
the other end of Stem (E), secure by thread Lock Ball
(H) onto the Stem (E). Hand tighten until snug.
Your fixture is now assembled and ready to use.
Enjoy!
STEP 5
- Install Bulb
A. This fixture uses Frosted G9 Xenon Bulbs. Maximum 40
watts.
B. Insert bulb and seat properly into place.
Do not touch the bulb with bare hands use
a cloth or glove.
IMPORTANT:
Figure 6
Socket
STEP 4
- Attach Ceiling Canopy to Crossbar
A. Thread the Mounting Screw (B) into Mounting Hole on
the Crossbar (A) tighten until sung. ,
B. Pass the Gaps on the Ceiling Canopy over the
Mounting Screw (B) and then rotate the Ceiling Canopy.
Do not free your hands until the diffuser is seated onto
the tabs.
Figure 5
Mounting
Screw
Crossbar
Ceiling
Canopy
Gap
Figure 7
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Prevent the bulb from contacting liquid or combustible materials.