Quoizel PCCS2824C Platinum Collection Cascade User Manual

Page 2

2of3

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2014 QuoizelInc.

April2014

STEP 8 - Install Bulb

A. This fixture uses standard bulb with

medium base. Maximum 60 watts.

B. Insert bulb and screw snugly into place.

Your fixture is now assembled and ready
to use. Enjoy!

Figure 7

Bulb

Figure 6

STEP 5 - Wire Connections

A. Use standard wire connectors (not included) to make all wire

connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.

B. Connect White Supply Wire from the Outlet Box to Ribbed side Wire

from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth

side Wire from fixture.

D. Connect Ground Wire from the Outlet Box to Ground Wire from

fixture.

E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

White wire

from supply

Ribbed side wire
from fixture

Black wire from
supply (or Red)

Smooth side wire
from fixture

Ground wire

from supply

Ground wire
from fixture

Figure 5

STEP 6

Attach Ceiling Canopy to

Mounting Screw

A. Place the Ceiling Canopy (I) over the

Mounting Screws and secure with
Lock Balls (BB). Hand tighten until
snug.

STEP 4

Install Crossbar

A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head

of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included)

Tighten until snug

Outlet Box

Outlet Box Screw
(not included)

Green Ground Screw

Figure 4

Mounting
Screw

STEP 7 - Attach Crystal Pendants

A. Attach Strings E (E) to the holes on the Loop

H as

shown.

B. Insert the String A (A) to the bottom center of the Socket Assembly

(L). Insert the Strings B (B) to the holes on the locations B on the
bottom center of the Socket Assembly (L). Insert the Strings C (C) to
the hole on the locations A on the bottom center of the Socket
Assembly (L). Insert the Strings D (D) to the hole on the locations D
on the bottom center of the Socket Assembly (L).

C. Insert the Diffuser (M) inside of the Shade (N) and attach to the Tabs

in the bottom edge of the Shade (N).

Assembly ( )

STRINGS DISTRIBUTION

Figure 8