Quoizel CKMS2822TM Marisol - Manual (Page 4)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
4of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2014 QuoizelInc.
STEP 5 Assemble Ceiling Canopy
-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop (F) and tighten until snug to secure the
Ceiling Canopy (E).
Figure 6
Ceiling Canopy
STEP 6 Attach Fixture Chain to Canopy
Chain Loop and Fixture Loop
-
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) to the Fixture
Loop with one Quick Link (S). Lift the fixture and Fixture
Chain (H) up And Attach the other end of the Fixture
Chain (H) onto the Canopy Chain Loop (F) with another
Quick Link (S). The fixture will now hang safely. Close
the chain loop at the Ceiling Canopy Loop (F).
Fixture Loop
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Figure 5
Canopy Chian Loop
Outlet Box
Canopy
Lock Ring
STEP 4
- Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
Figure 4
Outlet Box
Crossbar
Hex Nut
Nipple
Lock Washer
Canopy
Chain Loop
January2014
Assembly Instruction Sheet #IS-CKMS2822TM
For Style CKMS2822TM
Quick Link
Quick Link