Quoizel TF879CVB Larissa - Manual (Page 3)

INSTALLATION INSTRUCTIONS
WHITE OR RIBBED
BLACK( OR RED) WIRE
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE FROM HOUSE
FROM FIXTURE
BLACK OR SMOOTH
STEP 4 :
*Use Wire Connectors (not supplied) to connect the
wires.
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White ( or Ribbed) Wire to the
Fixture Supply Wire ( White or Ribbed Side) .
c. Connect the House Black( or Red) Wire to the Fixture
Supply Wire ( Black or Smooth Side) .
d. Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet
Box.
STEP 5 :
a. Screw the Hex Nut end of the Nipple with Nuts into the Hex
Coupling underside of the Socket Assembly. Using pliers,
thread the Hex Nut against the hex coupling underside of
the Socket Assembly. Hand-tighten until snug.
STEP 6 :
a. Place the Shade over the end of the Nipple. Attach one
end of the Side Chain onto the Hook on the side of the
Fixture Canopy. Attach the another end of the Side Chain
onto the Hanger inside of the Shade.
b. Adjust the Knurled Nut on the Nipple against the inside
bottom of the Shade. Then thread the Finial onto the Nipple
and hand-tighten until snug.
STYLE NUMBER: TF879CVB
Socket Assembly
Nipple with Nuts
STEP 7:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
Hook
Fixture Canopy
Side Chain
Nipple
Knurled Nut
Hanger
Shade
Finial
3 OF 3