Quoizel LP5009IB La Parra User Manual

Page 5

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

2011 QuoizelInc.

August2011

5of8

STEP 3

Attach Crossbar to Outlet Box

A. Drill a 5/8” diameter clearance hole on the top inside

center of the Outlet Box and through the Structural
Support Member.

B. Place Crossbar (A) onto the Outlet Box and line up

Mounting Holes with a set of holes on Crossbar (A).

C. Thread Outlet Box Screws into the Mounting Holes on

the Outlet Box and tighten until snug to secure the
Crossbar.

D. Using a screwdriver, thread Mounting Screws (B) into

the Structural or Bridging Member and tighten until
snug.

Figure 3

Outlet Box

Outlet Box
Screw (not
Supplied)

Crossbar

Assembly Instruction Sheet #IS-LP5009

For Style LP5009IB

Mounting Screw

Structural or
Bridging Member

STEP 4

- Attach Canopy Chain Loop to Nipple

A. Thread another Hex Nut (E) onto the end of the Nipple

(C).

B. Place the Lock Washer (D) over the end of the Nipple

C. Using pliers, thread the Hex Nut (E) against the Canopy

Chain Loop (G) and hand tighten until snug.

Figure 4

Outlet Box

Crossbar

Hex Nut

Nipple

Lock Washer

Canopy

Chain Loop

Ceiling
Line

Drill a
5/8” Dia.
Hole