Quoizel KY5009IN Kyle - Manual (Page 7)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
7of8
STEP 9
- Make Wire Connections
A. Push all slack fixture wire through Canopy Chain Loop
(G) into Outlet Box. Trim excess fixture wire leaving a
minimum of 6 inch. Hanging out of the Outlet Box.
B. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
C. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
D. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
E. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
F. Twist connectors until wires are tightly joined together.
G. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
H. Re-attach the Ceiling Canopy (F) as shown in Step 5.
Figure 11
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Figure 10
Canopy Chain Loop
Ceiling
Canopy
Canopy Lock Ring
Fixture Chain
Supply Wire
and Ground
Wire from
Outlet Box Supply Wire and
Ground Wire
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
Ceiling
Line
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2012 QuoizelInc. March 2012
STEP 10
- Attach Shade to Fixture Body
A. Place the Shade (M) setting inside of the Shade Holder
as shown .
Figure 12
Shade
Shade Holder