Quoizel KY5009IN Kyle - Manual (Page 3)

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
3of8
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 2
- Attach Nipple to Crossbar
A. Thread one Hex Nut (E) onto top end of the Nipple C .
B. Place one Lock Washer D over the top end of the
Nipple C and then thread the Nipple C into the center
hole of the Crossbar A . Hand tighten until snug.
C. Using pliers, thread the Hex Nut against the
Crossbar A and hand tighten until snug.
( )
( )
( ) ( )
( )
(E)
( )
Figure 2
Crossbar
Lock Washer
Hex Nut
Nipple
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
2012 QuoizelInc. March 2012
STEP 1
- Attach Fixture Loop to Fixture
Assembly
A. Thread the Fixture Loop (L) on to the Nipple on the top
of Fixture Assembly (N). Tighten until snug.
Fixture
Assembly
Fixture Loop
Nipple
Figure 1
STEP 3 Attach Crossbar to Outlet Box
-
A. Drill a 5/8” diameter clearance hole on the top inside
center of the Outlet Box and through the Structural
Support Member.
B. Place Crossbar (A) onto the Outlet Box and line up
Mounting Holes with a set of holes on Crossbar (A).
C. Thread Outlet Box Screws into the Mounting Holes on
the Outlet Box and tighten until snug to secure the
Crossbar.
D. Using a screwdriver, thread Mounting Screws (B) into
the Structural or Bridging Member and tighten until
snug.
Figure 3
Outlet Box
Outlet Box
Screw (not
Supplied)
Crossbar
Mounting Screw
Structural or
Bridging Member
Drill a
5/8” Dia.
Hole