Quoizel KD5015MM Kendra - Manual (Page 3)

Fixture Loop
Support Part
Fixture Cover Short
Nipple
Hex Coupling
Fixture Body
INSTALLATION INSTRUCTIONS
STEP 2:
a. Thread Lock Screws into the Bead on the top of the
bottom Support Arm. Hand-tighten until snug.
STEP 3:
a. Screw the Short Nipple into the Hex Coupling inside of
the Fixture Body. Tighten until snug.
b. Place the Fixture Cover and the Support Part over the
Short Nipple. Secure them by threading the Fixture
Loop onto the top end of the Short Nipple. Hand-tighten
STEP 4:
a. Secure the Crossbar onto the Outlet Box with Outlet
STEP 5:
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
d. Thread another Hex Nut onto the bottom end of the
STYLE NUMBER: KD5015MM
Lock Screw
Bead
Support Arm
Outlet Box
Crossbar
Outlet Box
Screw
Lock Washer
Crossbar
Hex Nut
Nipple
Hex Nut
3 OF 5
Pliers is required on this step.