Quoizel EVE5103PN Eastvale - Manual (Page 3)

Figure 2
12” Rod
3of6
STEP 2 Assemble Rods
-
A. Determine the Rods (L/M) to be assembled to the Fixture
Assembly according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (L/M) and then thread the chosen Rods (L/M) and
the Fixture Assembly together. Hand tighten until snug.
6” Rod
6” Rod
12” Rod
Fixture
Assembly
Supply Wire and
Ground Wire
Assembly Instruction Sheet #IS-EVE5103PN
For Style EVE5103PN
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
STEP 1 Assemble Side Rod Assembly
-
A. Thread the end of the Center Rod (H) onto the nipple on
the top center of the Shade Assembly (N). Hand tighten
until snug.
B. Pass the center hole of the Side Rod Assembly (G) over
the top end of the Center Rod (H). Insert the ends of Side
Rods into the Balls on the Support Arms.
C. Pass the Cap (J) over the top end of the Center Rod (H),
attach to the top of the Side Rod Assembly (G). Secure
them together by threading the Coupling (I) onto the
Center Rod (H). Hand tighten until snug.
Coupling
Cap
Side Rod
Assembly
Center Rod
Shade Assembly
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
, .
. .
October2012
Ball
Support Arm
Figure 1