LaMotte DirectFlo DuoSoft 1028 - Manual (Page 7)

7
PROCEDURE C — continued
CLOSED
Place the softener in the sink
so that the stream of water
hits the top of the softener on the
side opposite the valve and fl ows
into the top well.
NOTE: Some
water will run
down the
outside of the
softener.
Turn on the sink
faucet. Adjust the
water fl ow until
the stream is about
¼” in diameter.
Replace the plug
in the top of the
softener. Turn the
plug clockwise
one complete
turn to lock it
into the upright
position.
Allow the softener
to fi ll with water.
When the
softener is full,
open the valve to
rinse the media.
Close the
softener valve.
1. 2.
3. 4.
5.