LaMotte S-XL 1128 - Manual (Page 2)

PRO CE DURE A - IN STRUC TION FOR USE
Adjust flow
to maintain
the 1" layer
of water
over resin.
6.
Let effluent
run to waste
5.
for about 3 minutes
to wash out residue
from the previous
sample.
3
MIN
UTE
S
SLOWLY turn on
faucet and adjust
the flow of water
into softener until
the stream of water
is about 1/8 inch in
diameter.
2.
Fill chamber
until a 1"
layer of
water is
visible over
the resin.
3.
Attach
adapter on
inlet hose to
faucet. Fully
open clamp on
inlet hose.
1.
Unclamp outlet
hose at bottom of
softener.
4.
When
softener is
disconnected
from faucet,
clamp inlet
hose.
8.
If softener is
to be stored
unused for
any length of
time, keep a
1" layer of
water over
resin column
to prevent
drying and
cracking.
9.
After enough
softened water
7.
has been collected,
turn off faucet and
clamp outlet hose.