LaMotte OAKITE ALKALINE TEST KIT OKT 9205 - Manual (Page 16)

Test Kit Procedure 126 continued
NOTE 1: Step 5 is very important to the accuracy of the titration and should always be
performed. The reason for this is due to the natural occurring alkalinity in the
water used to dilute the Oakite Product. This alkalinity will give erroneously
higher concentration values unless corrected.
*NOTE 2: For complete instructions on how to use the Direct Reading Titrator please
refer to the enclosed instruction sheet.
Use Concentration Sample Volume Multiplying Factor (F)
Oakite Material g/ l (oz/gal) % by vol in ml % by vol g/ l (oz/gal)
6 3.8-15 (0.5-2) 10 6.0 (0.80)
542 NN 5-10 1 9.5
Aluminum
Cleaner 166 45-60 (6-8) 1 18 (2.4)
Aluminum
Cleaner NSS 1-4 10 1.8
Aluminum
Cleaner NST 5-10 2 7.5
CPA 0.5-2 5 0.86
Felt Life 0.5-2 10 1.1
FiSan-Lube 3.8-15 (0.5-2) 10 7.5 (1.0)
FiSan-Panacea 0.25-1 10 0.70
Formula B-50 2-8 5 3.2
Formula C 1-4 5 4.3
Formula L 2-5 1 4.3
Formula MM 3-10 1 7.3
Formula MM-OF 3-10 1 8.5
Formula P-Q 2-10 2 3.7
5/20/88
Supersedes 1/22/87
Ptd. in U.S.A.
TP/TK 126