Lamotte com pany – LaMotte COLOR IN WATER TEST KIT CT-PC User Manual
Page 2
PRO CE DURE
1.
Fill one color column (7524) to 50 mL line with sample water.
NOTE:
If sample contains a high level of color, pour off water to
25 mL line. Run test on 25 mL sample.
2.
Fill second color column (7524) to 50 mL line with color-free
water.
NOTE:
If using a 25 mL sample, fill second column to 25 mL line
with color-free water.
3.
Place the two columns side by side. Note the difference in color.
4.
Use the pipet to add 0.5 mL of *Standard Color Reagent (6058) to
the tube containing color-free water. Use the stirring rod (1114) to
mix contents. Looking down through the tube, compare color to
color in sample color column.
5.
Continue adding *Standard Color Reagent in 0.5 mL increments,
mixing after each addition, until color matches color in sample
color column. Count number of increments of *Standard Color
Reagent added.
6.
Use chart below to determine color. Record as color units.
COLOR TEST RESULTS
Number of
Measured
Additions
Amount in mL
50 mL sample
Color Units
25 mL sample
Color Units
1
0.5
5
10
2
1.0
10
20
3
1.5
15
30
4
2.0
20
40
5
2.5
25
50
6
3.0
30
60
7
3.5
35
70
8
4.0
40
80
9
4.5
45
90
10
5.0
50
100
LaMOTTE COM PANY
Helping Peo ple Solve An a lyt i cal Challenges
SM
PO Box 329 • Chestertown • Mary land • 21620 • USA
800-344-3100 • 410-778-3100 (Out side U.S.A.) • Fax 410-778-6394
Visit us on the web at www.lamotte.com
8/06