LaMotte TDS-DR 4801-DR - Manual

TOTAL DISSOLVED SOLIDS (TDS)
DIRECT READING TITRATOR METHOD
MODEL TDS-DR · CODE 4801-DR
QUANTITY CONTENTS CODE
60 mL *TDS Reagent A *4802DR-H
60 mL *TDS Reagent B *4803DR-H
15 mL *Methyl Orange Indicator, 0.1%
w/Halidex
*2299-E
2 Direct Reading Titrators, 0-1000 Range 0384
2 Test Tubes, 5-10-15 mL, glass, w/caps 0778
1 Pipet, 1.0 mL, plastic 0354
60 mL Demineralizer Bottle 1151
2 Resin Columns 1079
**WARNING: Reagents marked with an * are considered to be potential
health hazards. To view or print a Material Safety Data Sheet (MSDS) for
these reagents go to www.lamotte.com. To obtain a printed copy, contact
LaMotte by e-mail, phone or fax.
To order individual reagents or test kit components, use the specified code
number.
Read the LaMotte Direct Reading Titrator Manual before proceeding. The
Titrator is calibrated in terms of Total Dissolved Solids (TDS) expressed as parts
per million calcium carbonate (CaCO
3
). Each minor division on the Titrator
scale equals 20 ppm.
Two identical Direct Reading Titrators are furnished in this kit. Use one
Titrator to dispense TDS Reagent A; use the second to dispense TDS Reagent
B. Do not interchange the Titrators.
The Demineralizer Bottle is the source of all the demineralized water used in
this test. Read the instruction sheet before proceeding.
CARE OF THE RESIN COL UMN
At the conclusion of each test, treat the resin column with demineralized water
as described in Step 6. Stopper and cap the moist column between uses.
L Mott