LaMotte SOIL TEXTURE UNIT 1067 User Manual
L mott, Soil tex ture unit
SOIL TEX TURE UNIT
CODE 1067
QUAN TITY
CON TENTS
CODE
60 mL
Soil Flocculating Reagent
5643PS-H
60 mL
*Texture Dispersing Reagent
*5644PS-H
1
Soil Texture Stand
1053
3
Test Tubes, Soil Texture, 50 mL, w/caps
0760
2
Pipets, 1 mL, plastic, w/caps
0372
1
A Study of Soil Science Handbook
1530
*WARNING: Reagents marked with a * are considered hazardous substances.
Material Safety Data Sheets (MSDS) are supplied for these reagents. For your
safety, read label and accompanying MSDS before using.
To order individual reagents or test kit components, use the specified code
number.
This test is designed to separate soil into its three basic mineral fractions:
sand, silt, and clay. The amount of time required for the soil particles of
various sizes to settle in the soil separation tubes forms the basis for this
test. From the amount of material collected in each tube it is possible to
determine the approximate percentage of each fraction as represented in
the original soil sample.
The procedure for preparation of the soil sample for testing is described in
the accompanying handbook, A Study Of Soil Science.
The separation tubes should be marked for identification in the following
manner: Mark the first sedimentation tube “A”, the second “B”, and the
third “C”.
PRO CE DURE
1. Place the three Soil Separation Tubes in the rack.
2. Add the soil sample to Soil Separation Tube “A” until it is even with
line 15.
NOTE: Gently tap the bottom of the tube on a firm surface to pack
the soil and eliminate air spaces.
L Mott