LaMotte TRACER POCKETESTER FLUORIDE - Manual (Page 4)

4
INTRODUCTION
The Fluoride TRACER is a system specifi cally designed for the quick and accurate
measurement of fl uoride ions in drinking water and other aqueous samples. Unlike
other electrode based systems the Fluoride TRACER consists of the sensing
electrode, measuring electronics, and the display in one convenient package. This
meter is shipped fully tested; with proper use, this instrument will provide years
of reliable service.
Features
• Automatic temperature compensation (±10oC of calibration temperature)
• Automatic calibration
• Stability sensing to optimize accuracy
• Internal Datalogger for storing up to 25 readings
• Direct reading of ppm units
• Direct reading of relative mV units
• Automatic shut down after 12 minutes to preserve battery life
• Internal error detection
• Convenient TISAB TesTab reagent
SPECIFICATIONS
Range 0.10 to 9.99ppm (mg/L)
Accuracy +/- 3.0% of reading or 0.1ppm whichever is greater
Resolution 0.1ppm
Display 2000 count, Dual function 3 ½ digit LCD with
Bargraph, Display size: 24 mm x 20 mm
Electrode Europium doped lanthanum fl uoride single crystal
Electrode Life 1 year minimum
Response Time 90% of change in less than 30 seconds (typical)
Operating Temp. Range 32 to 140°F (0 to 60°C)
ATC Range 32 to 140°F (0 to 60°C)
Measurement Storage 25 tagged (numbered) data sets with recall
Battery Power Four (4) CR2032 button batteries
Low Battery Indication ‘BAT’ appears on the LCD
Auto Power Off After 12 minutes of inactivity
Dimensions/Weight 1.4 x 6.8 x 1.6” (36 x 173 x 41mm); 7.4 oz (210g)