ORBIT FR Positioner Controllers, Sequential: AL-48063 - Manual

9
>
Positioner Contr
ollers, PCUs & LCUs
(-) N/A
>
Positioner Controller, Sequential
AL-48061
AL-48060 SERIES
Series Overview
Model AL-48061 AL-48062 AL-48063
Formerly AL-4806-3C Formerly AL-4806-3C Opt.1 Formerly AL-4806-3C Opt. 1 V2
Horsepower PCU-Dependent 1 2
PCU Requires Separate PCU Built-In Built-In
Compatible With:
- AL-4146-2
- AL-4147-2
- AL-4106-2-6A
- AL-4107-2-6A
Notes Requires purchase of 910074-01 - -
control cable
➊ APPLICATIONS
• Antenna Test Automation
• Encoder or Synchro-Based Positioners
• Medium & Heavy Duty Positioning
Subsystems
➋ PRODUCT HIGHTLIGHTS
• Sequential Control Up to 6 Axes
• Dynamic Density Control (DDC)
• Selectable PIV & PID Control Loop
• Motion Profi les
• Audible Limit Alarm
• Digital Synchro Alignment
• Programmable Trigger Pulse Width
• Setup Utility Software
• Self-Diagnostics
This popular series of high performance, easy-to-operate, programmable six axis positioner
controllers provide manual front panel or remote control of rotary and linear positioners
manufactured by ORBIT/FR (or equivalent third party positioners that incorporate shunt wound
or permanent magnet brush DC motors, 50/60/400 Hz synchros, or encoders).
Optional interfaces are available for position transducers such as absolute encoders, Inductosyn ® ,
and inclinometers. The AL-48060 series controllers can be purchased in three confi gurations.
AL-48060’s digital servo loop provides advanced remote and local control while maintaining a simple human
interface for manual operation. Position transducer and velocity type can be individually confi gured for each
axis. These units are capable of driving a total of six axes sequentially, one axis at a time.
AL-48062 AL-48063