ORBIT FR Emergency Stop Unit (E-Stop): AL-9504-2 - Manual

27
>
Positioner Contr
ollers, PCUs & LCUs
>
Emergency Stop (E-Stop) Unit
AL-9504-2
➊ APPLICATIONS
• General Purpose Positioning
Subsystems
• Remote Emergency Stop Support
➋ PRODUCT HIGHTLIGHTS
• Up to 4 External E-Stop Switch
Inputs
• Up to 5 Outputs for Controller
Interlock
• OSHA Compliant
AL-9504-2
The AL-9504-2 Emergency Stop (E-Stop) Unit provides a central connection point for external
emergency stop panic buttons and positioner controllers that are located throughout
the system. In the event of an emergency stop, the AL-9504-2 will command the appropriate
positioner controller to disconnect motor drive power on all axes.
This unit is designed to disable up to five controllers and can support up to four external
E-Stop panic buttons.
front panel
 AC Power On/Off
 Emergency Stop (E-Stop)
 E-Stop Indicator
 Driver Indicator
supplied accessories
> CD-ROM Documentation Set:
 User Manual (Installation, Setup, Operation)
> Cables:
 AC Power Cord, IEC-320 (F) to Plug
options
 AL-9504-PENDANT - E-Stop button with 10m cable
 Opt. 101 - Additional Manual Set
 Optional  Standard
ORDERING INFORMATION
• AL-9504-2 Emergency Stop (E-Stop) Unit
AL-9504-PENDANT