CDA HVC 32 User Manual

Page 14

Program for Automatic Switching OFF of One Cooking Zone

This function permits to set a timer from

minutes for

automatic turning OFF of one cooking zone only.
Note: It is not possible to set this program for both the cooking
zones.

With the touch control switched ON press the timer keys

By pressing the key

the initial value is

By pressing the key

the initial value is

The displays of the cooking zones show " " (timer).

Then, within 10 seconds, set the cooking zone to be programmed
as indicated in the chapter "

Power Ignition and Adjustment of a

Cooking Zone".
The indicator light on the top right of the cooking zone display
lights up.
Then set the timer; press the timer keys

to increase

or reduce the value.
The indicator light on the bottom right of the timer display
lights up.

Now the program for automatic switching off is complete.
At the end of the countdown the cooking zone will switch off
automatically and an acoustic signal (beep) will sound (for one
minute only) and "

" will flash on the timer display.

Press any button of the touch control to reset the timer.

Note: The program for automatic switch off can be cancelled
at any time by resetting the power level of the cooking zone
(power level "

").