Exide Technologies Section 95.10 - Manual (Page 5)

Never lay tools or other metallic objects on the batteries as shorting, explosions and
personal injury may result.
Multi-cell systems attain high voltages; therefore, extreme caution must be exercised
during installation of a battery system to prevent serious electrical burns or shock.
Loose or dirty connectors/connections can cause battery fires. Keep all connectors/
connections clean and torques at proper values. Keep outside of batteries clean and
dry. Neutralize any acid corrosion with a cloth moistened with a solution of baking soda
and water, then wipe off all traces of soda.
Do not move or shift racks/cabinets once installed without first disconnecting load to
rack/cabinet and all inter-rack/cabinet connections. Consult wiring diagrams for location
of these connections.
Do not lift cells by terminal posts. Do not tamper with post seals, protective covers,
pressure relief vents or other battery components.
Disconnect the AC and DC circuits before working on batteries or charging equipment.
Assure that personnel understand the risk of working with batteries, and are prepared
and equipped to take the necessary safety precautions. These installation and
operating instructions should be understood and followed. Assure that you have the
necessary equipment for the work, including insulated tools, rubber gloves, rubber
aprons, safety goggles and face protection.
2.4 IMPORTANT MESSAGE
SECTION 3 - RECEIPT OF SHIPMENT
3.0 DELIVERY INSPECTION
Immediately upon delivery, examine for possible damage caused in transit. Damaged
packing material could indicate rough handling. Make a descriptive notation on the
delivery receipt before signing. If cell or unit damage is found, request an inspection by
the carrier and file a damage claim immediately. Any battery with post or seal damage
should be replaced.
2
CAUTION !
If the foregoing precautions are not fully understood, clarification should
be obtained from your nearest GNB representative. Local conditions may
introduce situations not covered by GNB Safety precautions. If so, contact
the nearest GNB representative for guidance with your particular safety
problem before proceeding to install or service these batteries. Refer to
applicable federal, state and local regulations as well as industry
standards.
The symbol at left indicates an important
message. If not followed, damage to and/or
impaired performance of the battery may
result.