Weller WXMT - Manual (Page 19)

WXMP/WXMT 5-10
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
− Coat the tips in solder before placing the soldering / desoldering
tool in the safety rest.
− Apply the solder directly to the soldering area, not to the
soldering/ desoldering tips.
− Do not apply excessive force to the soldering/desoldering tips.
− Always make sure that the soldering irons or the desoldering
tweezers are seated properly in the safety rest.
2.2 Intended use
Use the WXMP soldering iron or WXMT desoldering tweezers only
for the purpose indicated in the operating instructions of releasing,
accommodating and setting down chip components under the
conditions specified here. Intended use of the WXMP soldering iron
or WXMT desoldering tweezers also includes that you
−
adhere to these instructions,
− observe all other accompanying documents,
− comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer will not be liable for unauthorised modifications to
the device.
3 Included in delivery
WXMP soldering iron handpiece (packed) T0052920399:
− Handpiece WXMP with cable T0058765706
− Operating instructions of WXMP/WXMT
− Safety information booklet
Also included with WXMP soldering iron set T0052920499:
− WDH 50 safety rest T0051515699
− RT 3 chisel tip 40 W T0054460399
− Operating instructions of WDC 2
WXMT desoldering tweezers handpiece (packed) T0051317799:
−
Handpiece WXMT with cable T0058765707
− Operating instructions of WXMP/WXMT
− Safety information booklet
Also included with WXMT desoldering set T0051317899:
− WDH 60 safety rest T0051516999
− RTW 2 soldering tip pair 0.7 x 0.4 mm, 45°, T0054465299
− Operating instructions of WDC 2