Unitec Sierra Site Controller - Manual (Page 7)

W A S H P A Y
Document Name: WashPay Site Controller Installation Manual 3
3 Installation
3.1 Installing the Sierra Site Controller
The Sierra Site Controller system consists of a computer, a router, an optional 16-port
switch, and an optional report printer. If credit processing will be done using telephone
lines, an optional credit modem can also be purchased. If the Internet will be used for
credit processing, then the Internet cable can be connected directly to the router and a
credit modem will not be necessary. The computer and switch will connect into the
router using a CAT5E Ethernet cable.
Figure 2. Sierra Site Controller Computer
To install the Site Controller in an office area:
1. Place the Site Controller on a flat surface, such as a desk or table.
2. Connect the CAT5 cable from a LAN port of the router to the site controller.
3. Connect the power supply cable to the power supply port.
4. If applicable, connect the monitor to the monitor port, the keyboard to the PS2 port,
and a USB mouse to the USB mouse port.
5. If applicable, connect the modem to the DB9 port.
6. Turn on the power with the red button and program the Site Controller as instructed
in the Sierra Management Application Programming Manual
Document Number: WP1001