Unitec Portal Site Planning & Base - Manual (Page 8)

P O R T A L T I
Site Planning and Base Installation for Portal TI Units 4
the quantity and gauge of wires to be installed. Refer to local and national electrical
codes to select the proper conduit type and size. Figure 4 provides guidelines for
conduit planning.
Figure 4. Conduit Runs
To ensure the conduit sections will be located within the Portal base and not interfere
with the base frame, they should be routed so the stubs can be contained within the 4
inch square areas shown in the Figure 5.
Document #: PTL1008