List of messages – Canon DC100 EN User Manual

Page 69

uble?

Playing Back the Disc in an External DVD Device

External DVD device refers to DVD players, DVD recorders, computer’s DVD drives and
other digital devices.

List of Messages

Problem

Solution

There is a brief stop between
scenes.

Depending on the DVD player, there might be a very short
stop between scenes during playback.

–

Disc is running, but image will
not appear on the TV screen.

TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.

You attempted to play back or dub an incompatible disc. Stop
playback/dubbing.

–

The disc cannot be
recognized by the device. Or,
even though the disc is read,
cannot play back the disc or
the picture is distorted.

The disc is dirty. Clean the disc with a soft lens-cleaning cloth.

The disc has not been finalized.

DVD-RW discs in VR mode can only be played back with VR
mode-compatible DVD players. Refer to the instruction
manual of your DVD device.

–

Cannot edit my recordings or
add recordings to the disc
with the DVD device.

It may not be possible to edit or add recordings with an
external DVD recorder on a disc recorded with this camcorder.

–

When writing on a disc in this
camcorder recordings
transferred from a computer,
an error message appears.

The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.

–

Message

Explanation

SET THE TIME ZONE,
DATE AND TIME

You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.

CHANGE THE BATTERY
PACK

Battery pack is exhausted. Replace or charge the battery pack.

TEMPERATURE TOO
HIGH CANNOT RECORD

The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the battery
and let the camcorder cool down before resuming use.

–

TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC

CANNOT RECORD
CHECK THE DISC

There is a problem with the disc. Replace the disc.

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

The disc’s recording surface may be dirty or scratched.

–

REACHED THE
MAXIMUM NUMBER OF
SCENES

The maximum number of scenes has been reached. Delete some
recordings (DVD-RW in VR mode) to free some space or replace
the disc.

22
55

CANNOT PLAY DISC

The disc is dirty or you attempted to play back a disc type not
supported (not DVD-R/RW).

–

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.

CANNOT EDIT DISC

There are no scenes to edit or the recording is damaged.

–

This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.