Canon DC100 EN - Manual (Page 68)

68
Playback/Editing
Problem Solution
Pressing the playback button
does not start playback. Check that the disc contains recorded scenes. –
Load a disc. 22
Set the camcorder to . 28
You may not be able to play with this camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives. –
If using a single-sided disc, check that the disc is inserted with
the label side facing up. 22
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use. –
During playback there is
video noise, the sound is
distorted or the disc cannot be
read. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 72
You may not be able to play with the camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives. –
Cannot add scenes to the
playlist. The disc is full (“ END” flashes on the screen). Delete some
recordings to free some space.
55
You cannot add more than 999 scenes to the playlist. –
Cannot divide the scene. You cannot edit or delete scenes on a disc that was protected
in another digital device. –
Cannot edit the disc title. You cannot add a title to a DVD-R disc after it was finalized. 61
Unfinalize the disc first (DVD-RW in VIDEO mode). 63
You may not be able to edit the title if you entered it with
another digital device. –
Remove the disc protection. 57
Cannot create a Photomovie
scene. There are no still images recorded on the disc. –
The disc is full (“ END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space.
55
Cannot edit or delete scenes. Remove the disc protection. 57
Scenes cannot be deleted in a DVD-R disc or a DVD-RW disc
recorded in VIDEO mode. –
You cannot edit or delete scenes on a disc that was protected
with another digital device. –
Cannot finalize the disc. You cannot finalize a disc (DVD-R or DVD-RW) recorded in
VIDEO mode if it contains only still images. Record at least
one scene before finalizing the disc. 24
61
No sound from the built-in
speaker. Open the LCD panel. –
Speaker volume is turned off. Adjust the volume from the
[SYSTEM SETUP] menu in
mode.
29