Triton RTA 300 - Manual (Page 2)

2 3
GB GB
CONTENTS
SPECIFICATIONS
Part no: RTA300
Table size: 540mm x 690mm
Cuts: Planing, trenching, rebating, moulding, endgrain work,
free-hand work
Net weight: 12.5kg (27.5lb)
Protect your hearing
Always use proper hearing protection when tool noise exceeds 85dB.
Thank you for purchasing this Triton product. These instructions contain information necessary
for safe and effective operation. This product has a number of unique features,
please read this manual to make sure you get the full benefit of its unique design.
Keep this manual close to hand and ensure all users have read and fully understand the instructions.
Contents / Specifications / Symbols Parts List
PARTS LIST
Specifications 2
Symbols 2
Parts List 3
Safety 4
Fitting the Table 6
Warranty 7
1. Router table (1)
2. Vacuum hose (1)
3. Protractor (1)
Fastener Bag 1 Contents
4. Tapered hose adaptor (1)
5. Series 2000 workcentre locking hook (1)
6. M4 x 35mm countersunk screw (1)
7. M4 hex nut (1)
8. Small insert ring (1)
9. Large insert ring (1)
10. Alignment tool (1)
Router Plate Components
11. Router plate (1)
12. Sub plate (1)
Fastener Bag 2 Contents
13. Plate clamp base (4)
14. Plate clamp knob (4)
15. M6 x 45mm countersunk screw (4)
16. M6 flange nut (12)
17. M6 x 60mm coach bolt (4)
18. M6 x 16mm countersunk screw (4)
19. Plate spacer (4)
20. Washer (4)
21. Clamp (4)
22. Clamp base (4)
23. Clamp spring (4)
24. Clamp knob (4)
Sliding Table Insert Components
25. Sliding table insert (1) Fastener Bag 3 (Sliding Table) Contents
26. Inner bearing (2)
27. Inner clamp knob (2)
28. Outer bearing (2)
29. Hold-down (1)
30. M6 x 45mm countersunk screw (2)
31. M6 x 20mm countersunk screw (3)
32. M6 flange nut (2)
33. M6 hex nut (3)
Fence Components
34. Fence (1)
35. MDF fence face (2)
36. Rear guard (1)
37. Front guard (1)
Fastener Bag 4 (Fence) Contents
38. Fence bracket (2)
39. M4 nyloc nut (10)
40. M4 x 25mm countersunk screw (2)
41. 1.5mm shim (2)
42. 1.0mm shim (2)
43. Micro adjuster (2)
44. M4 x 45mm countersunk screw (8)
45. Fence springs (8)
46. Fence spring base (4)
47. Fence spring plate (4)
Pressure Finger Components
48. Straight finger (2)
49. Bent finger (2)
50. Spacer (2)
51. Plastic washer (4)
52. Finger post (4)
SYMBOLS
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your local authority or retailer for
recycling advice.
Always wear ear, eye and respiratory
protection.
Instruction warning.
Do not use before viewing and
understanding the full operating
instructions
Refer to DVD for full instructions