Trebor CP PURUS - Manual (Page 5)

PURUS CP PUMP OPERATION / MAINTENANCE MANUAL PAGE 5
2 SAFTEY
2.1 SAFETY PRECAUTIONS
This section provides important information for safe operation of the Purus CP pump.
The equipment described in this manual can be used to pump hazardous chemicals that
can be dangerous. Local policies and procedures for safely operating any Trebor Purus
CP pump(s) supersede the safety considerations listed below. It is the responsibility of all
personnel to follow such policies and procedures. All safety guard devices must be in
place when equipment is in operation. Operators, set-up operators, helpers or installation
personnel should not alter, remove or disable safety devices or equipment.
2.1.a General Safety
 There are no serviceable parts inside the pump; never open or disassemble.
Attempting to do so will render the pump inoperable and void the product warranty.
 Do not attempt to work on or with hazardous chemicals or electrical equipment without
proper safety training and certification, understand first aid for electrical shock and
hazardous chemicals spills.
 Lockout and tag the electrical and chemical systems prior to installation or
replacement. Refer to company safety policies and procedures prior to installation or
replacement.
 Always disengage the pump and optional equipment from electrical sources prior to
installation or replacement.
 Always refer to company safety policies and procedures for flushing and
decontamination prior to removal.
CAUTION: When handling potentially dangerous fluids under pressure, the pump
and its fittings should be placed in an enclosure away from operators.