Trebor CP PURUS - Manual (Page 12)

PAGE 12 PURUS CP PUMP OPERATION / MAINTENANCE MANUAL
6 PC15 (OPTIONAL) INSTALLATION
6.1 PC15 OVERVIEW
The PC15 Pump Controller is designed specifically to operate Trebor’s Purus CP pump.
Cross-phase timing results in overlapping pump strokes which produces a near pulse-less
pump output. PC15 controllers can be configured depending on flow requirements (See
QIG manual)
6.2 PC15 INSTALLATION
The PC15 pump controller can be installed in any orientation. Pump controller mounts
using four ¼” (6mm) bolts and should be mounted above the level of the fluid feeding the
pump. Allow clearance for tubing connectors.
Figure 6-1 Dimension (in / [mm])