Trebor 120D Mega - Manual (Page 6)

PAGE 6 MEGA 120D PUMP OPERATION / MAINTENANCE MANUAL
Figure 2-2
NOTE: See Surge Suppressor Operation Manual for detailed installation instructions.
2.3 OPTIONAL LEAK SENSING
2.3.a Installation

Remove plug and seal from port.

Install probe assembly into leak sensor port. Probe is self-sealing and does not
require a seal.

Thread probe cap into port. (NOTE: Do not over tighten; damage to threads will
occur.)

Connect fiber optic cable to sensor (NOTE: Minimize bends in fiber optic cable to 2”
radius minimum to help ensure optimum signal strength.). Fiber optic cable can be
cut to desired length using the cable cutter provided.