tekmar M3061 Mixing Valve Adapter Kit - Manual (Page 2)

tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.
Head Office: 5100 Silver Star Road
Vernon, B.C. Canada V1B 3K4
(250) 545-7749 Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com
Product design, software and literature are Copyright © 2008 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
2 of 2
All specifications are subject to change without notice.
Printed in Canada. D 011A - 11/08.
Limited Warranty The liability of tekmar under this warranty is limited. The Pur-
chaser, by taking receipt of any tekmar product (“Product”), acknowledges the
terms of the Limited Warranty in effect at the time of such Product sale and
acknowledges that it has read and understands same.
The tekmar Limited Warranty to the Purchaser on the Products sold hereunder
is a manufacturer’s pass-through warranty which the Purchaser is authorized
to pass through to its customers. Under the Limited Warranty, each tekmar
Product is warranted against defects in workmanship and materials if the Prod-
uct is installed and used in compliance with tekmar’s instructions, ordinary
wear and tear excepted. The pass-through warranty period is for a period of
twenty-four (24) months from the production date if the Product is not installed
during that period, or twelve (12) months from the documented date of installa-
tion if installed within twenty-four (24) months from the production date.
The liability of tekmar under the Limited Warranty shall be limited to, at tekmar’s
sole discretion: the cost of parts and labor provided by tekmar to repair defects in
materials and/or workmanship of the defective product; or to the exchange of the
defective product for a warranty replacement product; or to the granting of credit lim-
ited to the original cost of the defective product, and such repair, exchange or credit
shall be the sole remedy available from tekmar, and, without limiting the foregoing in
any way, tekmar is not responsible, in contract, tort or strict product liability, for any
other losses, costs, expenses, inconveniences, or damages, whether direct, indirect,
special, secondary, incidental or consequential, arising from ownership or use of the
product, or from defects in workmanship or materials, including any liability for funda-
mental breach of contract.
The pass-through Limited Warranty applies only to those defective Products returned
to tekmar during the warranty period. This Limited Warranty does not cover the cost
of the parts or labor to remove or transport the defective Product, or to reinstall the
repaired or replacement Product, all such costs and expenses being subject to Pur-
chaser’s agreement and warranty with its customers.
Any representations or warranties about the Products made by Purchaser to its cus-
tomers which are different from or in excess of the tekmar Limited Warranty are the
Purchaser’s sole responsibility and obligation. Purchaser shall indemnify and hold
tekmar harmless from and against any and all claims, liabilities and damages of any
kind or nature which arise out of or are related to any such representations or warran-
ties by Purchaser to its customers.
The pass-through Limited Warranty does not apply if the returned Product has been
damaged by negligence by persons other than tekmar, accident, fire, Act of God,
abuse or misuse; or has been damaged by modifications, alterations or attachments
made subsequent to purchase which have not been authorized by tekmar; or if the
Product was not installed in compliance with tekmar’s instructions and/or the local
codes and ordinances; or if due to defective installation of the Product; or if the Prod-
uct was not used in compliance with tekmar’s instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO CONTRACTUALLY
EXCLUDE, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, DURABILITY OR
DESCRIPTION OF THE PRODUCT, ITS NON-INFRINGEMENT OF ANY RELEVANT
PATENTS OR TRADEMARKS, AND ITS COMPLIANCE WITH OR NON-VIOLATION
OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY LEGISLATION; THE
TERM OF ANY OTHER WARRANTY NOT HEREBY CONTRACTUALLY EXCLUDED
IS LIMITED SUCH THAT IT SHALL NOT EXTEND BEYOND TWENTY-FOUR (24)
MONTHS FROM THE PRODUCTION DATE, TO THE EXTENT THAT SUCH LIMITA-
TION IS ALLOWED BY THE GOVERNING LAW.
Product Warranty Return Procedure All Products that are believed to have defects
in workmanship or materials must be returned, together with a written description
of the defect, to the tekmar Representative assigned to the territory in which such
Product is located. If tekmar receives an inquiry from someone other than a tekmar
Representative, including an inquiry from Purchaser (if not a tekmar Representa-
tive) or Purchaser’s customers, regarding a potential warranty claim, tekmar’s sole
obligation shall be to provide the address and other contact information regarding the
appropriate Representative.
Limited Warranty and Product Return Procedure
Mixing Valve Adapter Kit M3061
Technical Data
Literature — D 011A
Maximum Actuator Torque — 360 in-lb (40 Nm)
Ambient Temperature Range — -22 to 122°F (-30 to 50°C)
Coupler/Standoff Material — 304 Stainless Steel
Bushing Material — Oilite Bronze (Self-lubricating)
Plate Material — 304 Stainless Steel
Compatible Actuators — Belimo GMB24-3 On/Off-Floating
Point Control, Non-Spring Return,
24 V (ac)
Actuator Opening Time — 150 sec.
Setting the Belimo Actuator
Wire the Belimo actuator to the floating mix outputs on
the tekmar mixing control as shown.
Ensure the coupler shaft can rotate freely inside the
actuator shaft clamp. Set the valve handle to the
‘closed’ position. Depress manual override button (A)
and rotate the clamp to the ‘0’ position. Tighten both
clamp nuts (B) to about 7 ft-lb.
With manual override (C) depressed, rotate clamped
shaft (D) all the way to the ‘1’ position on the actuator.
Valve should be fully open.
Set reversing switch to the ‘1’ position for the
described setup. This switch allows the open/close
wiring to be reversed without the need to physically
switch the red and white wires. Actuator running time
is 150 seconds.
1.
2.
3.
4.
1
3
2
4
R e d
Blk
Wh t
Pwr Opn Cls
Mix
C lass II T r ansfor m er
120 /240 V ( ac) - 24 V (ac )
R
C
tekm ar M ixing
Outputs
Belim o
G M B24 - 3
24 V ( ac)
B
A
C
D