Stealth Cam STC-AC540IR Archer's Choice - Manual (Page 9)

www.stealthcam.com
Toll Free 877-269-8490
33
• Press the [DN] button to set the camera’s TV OUT to PAL.
• The word “ tu –
P ” will now be blinking.
• Press the [OK] to confirm this setting.
• The word “ tu ‐
P “ will be blinking and then stops.
• Once the blinking stops, power off the camera. Wait for 5 seconds
and then power up your camera again.
Thumbnail Images
• You will see a series of thumbnail images on your monitor.
• Press the [UP] or [DN] button to navigate though your thumbnail
images.
• On the upper left hand corner of your TV monitor, it will either
display the image icon or video icon to show you whether that
image is a still image or video clip.
• To view image in full screen, press the [OK] button.
• Press the [OK] button again it will return to the thumbnail view
from the full size image.
www.stealthcam.com
Toll Free 877-269-8490
34
Viewing Video Clips on handheld LCD monitor or home
TV monitor
• Follow the cable attaching instruction listed in previous section.
• You will see a series of thumbnail images on your monitor.
• Press the [UP] or [DN] button to choose the video clip you want to
watch.
• Press the [OK] button to play the video clip.
• You may pause the video clip by pressing the [OK] button during
the playback. Press [OK] button to resume playing.
• At the end of the video clip, press the [UP] or [DN] button to
proceed to the next video or image. If it is a video clip file, then it
will automatically start to play. If it is still image file then it will
show the image in full screen.
• When you view still images in full screen, you can return to
thumbnail image selection view by pressing the [OK] button.
NOTE: All videos are recorded with audio but only have sound when
viewing playback on a PC.
www.stealthcam.com
Toll Free 877-269-8490
35
Viewing files by computer
Your Stealth Cam Digital Scouting Camera is a plug and play USB
storage device for users of Windows 2000 / ME / XP / Vista / Windows
7 operating systems. This camera is not MAC compatible.
Viewing files on your computer via USB connection.
• Make sure the camera’s power switch is in the OFF position.
• Plug the larger end of the USB cable into an available USB port on
your computer.
• Plug the smaller end of USB cable into the camera’s side panel.
• The camera will automatically power ON and
display the word USb on the display screen.
• At the same time, your computer will recognize the camera as a
Removable Storage device. You will find it under MY COMPUTER.
www.stealthcam.com
Toll Free 877-269-8490
36
• At this point you have several options:
¾ To view your images or play your videos: Click on the
Removable Storage device and then drill down to the file you
want to see and double click on the file name.
¾ To save your images and videos: Highlight the file or files you
want to save and drag them to your hard drive.
¾ To delete your images and videos: Highlight the files or files
you want to delete and press the [DELETE] button.
¾ To erase all files and reformat you SD memory card: Right
click on the Removable Storage device under My Computer
and select FORMAT then click START. You will receive a
Warning message press [OK]. Then CLOSE to exit.
NOTE: Make sure before you FORMAT you are certain it is the
Removable Storage device for the camera.
• Once you’re done, simply unplug the cable from both your
computer and the camera. The camera will turn OFF automatically.