Stealth Cam STC-AC540IR Archer's Choice - Manual (Page 5)

www.stealthcam.com
Toll Free 877-269-8490
17
Setting the Camera’s Resolution in PIR operation mode:
Your Stealth Cam can be programmed to 3 different resolutions,
High (3 Stars‐8Mp), Low (2 Stars–5Mp), Base (1 Star–3Mp).
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
• The word CAMERA and the STARS will be blinking.
• Press the [OK] button ONCE to choose the selection.
• Press the [UP] or [DN] button to select the desired resolution.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
www.stealthcam.com
Toll Free 877-269-8490
18
Setting the Capturing Sequence in PIR operation mode:
Your Stealth Cam can be programmed to shoot 1‐9 pictures per
triggering.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
• Press the [UP] button ONE time to enter the Capturing Sequence
setting mode.
• The word CAMERA will be blinking.
• Press [OK] button and the current number of burst mode images
will blink.
• Press the [UP] or [DN] button to select the desired burst mode
setting or number of pictures per triggering.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
www.stealthcam.com
Toll Free 877-269-8490
19
Setting the Video Mode in PIR operation mode:
Your Stealth Cam can be programmed to record 10‐180 seconds of
video per triggering. The Video mode is only workable under PIR
mode.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
• Press [UP] button TWO times to enter Video setting mode.
• The word VIDEO will be blinking.
• Press [OK] button and the video length in seconds will be blinking.
• Press [UP] or [DN] button to select the desired video length from
10 to 180 seconds in 5 second increments.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
www.stealthcam.com
Toll Free 877-269-8490
20
Set the Digital Zoom in PIR operation mode:
Your Stealth Cam can be programmed to have 3 different zoom levels.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• The word PIR will be blinking, press OK to confirm the camera
operation by PIR detection.
• Press [UP] button THREE times to enter Zoom setting mode.
• The word ZOOM will be blinking.
• Press [OK] button and the zoom level number will now blink.
• Press the [UP] or [DN] button to select the desired zoom level
setting 1 (1X Normal) / 2 (2X Zoom) / 4 (4X Zoom).
• Press [OK] to confirm your selection
• Press [MENU] button to exit.
NOTE: The use of the digital zoom feature may degrade image &
video quality, as this tells the camera to focus on a specific are of the
image and increase its size. This will cause dithering of the image.