Stealth Cam STC-Z3IRTL Core - Manual (Page 20)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490 20
Ready for Use:

Switch from TEST/SET position to the ON position. If you’re not ready to
use the camera, simply slide the power switch to the OFF position.

When ready to use, position your camera in the field. Slide the power
switch to TEST/SET. Wait for the 2 faint short beeps and then slide the
switch to the ON position.
IMPORTANT: Please DO NOT slide the switch from OFF directly to
ON in one motion. Always slide to TEST/SET first, wait for the two
short beeps and then slide the switch to ON position.