Stealth Cam STC-Z3IRTL Core - Manual (Page 11)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490 11
BATTERY AND MEMORY INSTALLATION
Your Stealth Cam Advanced Digital Scouting Camera is designed to operate
using two different types of battery power options.
Batteries “AA” cell
The internal battery compartment accepts 8 “AA” cell batteries. Be sure to
use high quality brand name alkaline batteries. Install batteries with correct
polarity (+/-) as noted inside the battery compartment.
12V Lead Acid external battery
The camera is equipped with an external power jack designed to accept a
barrel plug cable attached to a sealed lead acid battery. (Sold separately).
Battery cable and complete 12V Lead Acid battery kits are available wherever
Stealth Cam scouting cameras are sold or call Toll-free 877-269-8490. Only
Stealth Cam external battery accessories are recommended.

Make sure camera is in the OFF position.

Insert the external battery barrel plug into the DC 12V jack on the bottom
of camera housing.

Turn the camera power on.
WARNING: Do not use different Voltage lead acid battery other than
the one specified in this section. Doing so will damage the camera and
will void the warranty.
WARNING: ALWAYS have the camera in the OFF position when
installing or removing batteries and memory card. Removing batteries
or memory card while the camera is ON may damage the camera.