Starlight Xpress SXVR-H674C - Manual (Page 23)

Handbook for the SXVR-H674C Issue 1 March 2012
23
‘relay box’ between the guider output and the input to the mount. Please contact your
local distributor if a relay box is required. Some mounts (Vixen, for example) use a
similar guider input socket, but have re-arranged connections.
The autoguider installed on a 70mm refractor guide ‘scope in the author’s garden (the
camera shown is the older SXVF version, but the connections are the same).
To use the autoguider, please proceed as follows:
1) Having started the SXVR-H674C software, open the autoguider control panel
by clicking on the autoguider menu button.