SoundOff Signal 400 Series Handheld Amp Box - Manual (Page 3)

1.800.338.7337 / www.soundoffsignal.com
MASTER ON / OFF
(Siren Standby)
Control LEDs
AUXILLARY BUTTON #s
1 2 3
4 5 6
LEVEL Switches (1,2,3
with indicators)
HORN LED
MANUAL LED
‘Ø’ LED
ALTERNATE HORN RING CONTROL
OPTION 1 OPTION 2
STANDBY OEM HORN OEM HORN
LEVEL 1 OEM HORN OEM HORN
LEVEL 2 Air Horn or Wail Button
Tone while Pressed *
Tap to Turn On Warning Tone, Tap
again to Change Warning Tone. Press
and Hold for Air Horn Tone
LEVEL 3 Tap to turn ON Warning
Tone, Tap again to
change Warning Tone.
Press and Hold for Air
Horn Tone
TONE SWITCH
OFF:
Air Horn Tone or
Wail Button Tone
while Pressed *
TONE SWITCH
ON:
Tap to change
Warning Tone,
Press and Hold
for Air Horn Tone
Horn Ring Program:
1. Press and Hold Auxiliary Button #3 and #4 until ‘Ø’ LED
flashes.
2. Press Auxiliary Buttons depending on the required settings
1 Horn Ring Scroll - Not used on Hand Held version
ON =Tone will advance through
tones programmed on Wail, Yelp,
and Tone push-buttons each time
vehicle horn is pressed.
OFF = Tone will advance through
tones pregrammed on Wail and Yelp
push-buttons each time the vehicle
horn is pressed.
2. Hands Free Mode: (Alternate Horn Ring Control Must be Diasabled)
Activates the siren tone when operator momentarily presses on
Vehicle Horn.
ON = Enabled
OFF = Disabled
3. Horn Ring Standby Tone: (Hands Free Mode must be disabled for
this function to work). (Alternate Horn Ring Control Must be
Disabled). Determines which tone to output when siren is in
standby and vehicle horn is pressed.
ON = Air Horn Tone
OFF = Wail Tone
4. Horn Ring Timeout: (Alternate Horn Ring control must be
disabled and hands free mode must be enabled
for function to have any effect). When vehicle
horn is pressed and tone changes, determines how
tone will change back to pre-vehicle horn press tone.
ON = Siren tone will revert back to pre-
vehicle horn tone after 8 seconds.
OFF = Siren tone will not revert back to
pre-vehicle horn press tone.
5. Alternate Horn Ring Control: Custom operation of vehicle
horn when pressed. Refer to figure left for details.
ON = Enabled
OFF = Disabled
Other Modes:
1. Press and Hold Auxiliary Button #1 and #5 until LEVEL #1 and
LEVEL #3 indicator LED flashes.
1. Horn Ring Activation: Determines when pressing the Vehicle
Horn will activate siren to
ON = Enabled only when level 3 is
activated.
OFF = Enabled whenever siren is on.
2. Buzzer: Audible tone from control panel whenever operator
presses push-button or changes position of slide/rotary
switch.
ON = Enabled
OFF = Disabled
3. Park Kill Latch: When Park Kill input is triggered, determines how
siren tone proceeds once park kill input is no longer active.
ON = Tone remains disabled until operator
selects other tone.
OFF = Tone resumes once Park Kill input is
no longer active
4. Power Down: Determines whether siren will operate when
ignition input has no voltage
ON = Siren will operate w/o voltage on
ignition input
OFF = Siren is disabled when no voltage is
present on ignition input
5. Auxiliary Input: Determines which siren tone will activate when
auxiliary input is activated.
ON = Air Horn tone
OFF = Tone which is programmed on Wail
push-button
2. When finished, momentarily depress Radio Rebroadcast (RR)
button to exit programming mode.
7
HANDHELD REMOTE
PSRNHHC1
SIREN LED
RADIO
REBROADCAST LED
ETSA46(x)HPP 3.4.13
* Set in “Horn Ring Program” 3. Horn Ring Standby Tone
6. Alternate Horn Ring Control Option:
ON = Option 2
OFF = Option 1
(Alternat Horn Ring Control must be enabled).
Custom operation of vehicle horn when pressed.
Refer to figure left for details.