SONIQ QMS300B - Manual (Page 9)

z Make sure the AC power cord from this unit is properly connected to a
240V 50Hz household AC power outlet.
z Make sure that the minimum distance around the whole unit for
sufficient ventilation is 10cm.
Listening to Your iPod / Charging The Battery
IMPORTANT!
In order to prevent unwanted distortion during iPod
playback, it is
recommended that you set the EQ in your iPod to the “Off” position.
Go to the Main Menu in your iPod and then select the Settings Menu,
select the EQ Setting, and make sure that the EQ function is set to
“Off”.
( Main Menu > Settings Menu > EQ Setting > Select “Off” )
Note : We have also included one flat adaptor
with no opening at all. This serves as a dust
cover that can be inserted in the docking station
if no iPod will be connected to this unit for an
extended period of time. Remove this dust cover
before use.
This unit provides an iPod
docking station on the top panel. You can connect
any “dockable” iPod, available as of August 2006, to the docking station and play
your iPod
through the speakers of this unit. The power to your device is being
supplied by this unit, not by the iPod internal battery.
1) Turn the main power switch to ‘On’ position at the back of the unit.
2) Plug the iPod to the iPod docking station. Then press PLAY/PAUSE button on
the top panel or remote control to start music playback.
3) To pause momentarily during iPod playback, press the PLAY/PAUSE button
on the top panel or remote control or iPod unit. Press the PLAY/PAUSE button
once more to cancel Pause mode and resume playback.
4) Press NEXT button on the remote control or iPod unit to go to the next song.
- 8 -