Playing a disc – SONIQ PD80 User Manual

Page 11

-11-

This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in
a manner that allows specifi c or limited operation during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the
specifi c DVD in question for more information about the options available on that DVD.
“

” may appear on the screen during operation. A “

” means that the desired operation is not

permitted by the unit or disc.

Playing a Disc

1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.

See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.

2. Press the OPEN knob to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side

facing up, pushing gently until you hear a “click”.

4. Close the disc door. It takes a short while for your unit to load the disc. After loading,

the unit will automatically bring you to the main menu of the DVD or start playing the
DVD.

5. If the unit does not automatically start playing the DVD, press the

PLAY button

on the remote control or button on the unit.

Pausing Playback (Still Mode)

Press the PAUSE button. To resume normal playback, press the PLAY button on the remote control or button on
the unit.
For a DVD, each time you press the PAUSE button on the remote control, the picture advances one frame.

Stopping Playback

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where
the disc was stopped, press the PLAY button on the remote control or button on the unit.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button on the remote
control or button on the unit will reset the DVD to the beginning.

Fast Forward / Fast Reverse

1. Press the SEARCH

SEARCH button when a disc is playing. Each time you press the SEARCH

SEARCH button, the playback speed changes in the following sequence:

Press the PLAY button on the remote control or press the button on the unit when you reach the desired point
to resume normal playback.

Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.

Skip (Forward / Reverse)

• Press

the NEXT button to advance titles, chapters/tracks.

• Press the

PREV button to go back to current or previous titles, chapters/tracks.

• For an Audio CD, use the number buttons on the remote control to jump directly to the desired track number.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred
language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format number.

2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections only via the disc menu. If this is the case, press the MENU

button and choose the appropriate language on the disc menu.

• You can select different audio channels (Stereo, Mono Left, Mono Right or Mix-Mono) on an Audio CD by

pressing the AUDIO button repeatedly.

Audio 1/3:Dolby D 2ch English

PVS9380V IB MTK SAA w bag SONIQ.indd 11

2010-7-30 10:10:46