Compuprint SP40 User Manual
Page 45
41
Setup Parameter
Values
Description
LINE MODE
LF=LF, CR=CR
CR=LF+CR
LF=LF+CR
LF&CR=LF+CR
If the printer receives a LF code (LF), it only performs a line feed. If
the printer receives a CR code (CR), it only performs a carriage
return.
If the printer receives a CR code (CR), it performs a carriage return
follow ed by a line feed. If the printer receives a LF code (LF), it
performs a line feed.
If the printer receives a LF code (LF), it performs a line feed
follow ed by a carriage return. If the printer receives a CR code
(CR), it only performs a carriage return.
If the printer receives a LF code (LF) or a CR code (CR), it
performs both a line feed and a carriage return.
WRAP MODE
truncate,
autow rap
The data exceeding the line length are truncated (
truncate
) or
printed on the follow ing line (
autowrap
).
SLASHED ZERO
no, yes
Selects the printing character for zero, w ith a slash (
yes
) or
w ithout (
no
).
PRINT DIRECTION
unidir., bidir., sw
control
Selects the printing direction of the print head: unidirectional
(
unidir
.), bidirectional (
bidir
.) or selected via softw are (
sw
control
).
EJECT ON FF
no, yes
Performs a form feed according to the selected page format (
no
)
or ejects a cut sheet loaded into the printer (
yes
).
RESET WITH EJECT
no, yes
When the printer receives a reset command, if this item is set to
yes
the paper inserted in the printer is ejected. If the item is set to