Soleus Pulse Rhythm HRM (SH010) - Manual User Manual
Page 7
Soleus Pulse Rhythm
RDY13
12) How to set the ff. parameters: TIME, NIGHT, CONTRAST and CHIME while in
Time mode.
•
Press and hold S11. TIME will appear and blinks.
•
Press S1 to toggle the TIME through CHIME.
•
Press S7 to exit.
How to set the TIME:
TIME 1/ Time 2 setting:
•
Press S5 while TIME is blinking. The watch will display T1 or T2.
•
Press S1/S11 to choose between T1 or T2 to set.
•
Press S5 to set the selected time (T1 or T2). The HOUR blinks.
o
Set the HOUR by pressing S1 or S11 and press S5 to enter.
o
Set the Minute by pressing S1 or S11 and press S5 to enter.
o
Set the SECOND by pressing S1 or S11 and press S5 to enter.
o
Set the YEAR by pressing S1 or S11 and press S5 to enter.
o
Set the MONTH by pressing S1 or S11 and press S5 to enter.
o
Set the DAY by pressing S1 or S11 and press S5 to enter.
o
Set the 12/24H by pressing S1 or S11 and press S5 to enter.
o
Set the Month/Date of Date/Month format by pressing S1 or S11 and press S5
to enter.
o
Press S7 to exit.
How to set the NIGHT mode function:
•
Press S5 while NIGHT is blinking. The watch will display 10 seconds blinking.
•
Press S1/S11 to change to 20 sec or NIGHT ON.
•
While in 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to NIGHT
setting screen.
•
While in NIGHT ON setting screen, Press S5 to accept the ON setting. The watch will
display the START TIME.
•
Press S1/S11 to toggle between START TIME and END TIME.
•
Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
•
Press S1/S11 to change the hour setting.
•
Press S5 to change the MINUTE. Minute digits will start to blink.
•
Press S1/S11 to change the minute setting.
•
Press S5 to go back to START TIME setting screen.
•
Press S1/S11 to set the END TIME. Hour digit will start to blink.
Note: Follow the procedure in setting the START TIME.
•
Press S7 to exit to NIGHT ON setting screen.