Sky-Watcher AZ114 MOUNT - Manual (Page 12)

12
U
tility Functions
Utility Functions are useful tools that provide simple, one-step processes to your SynScan
TM
AZ.
Show Position - This displays the coordinates of the location where the telescope is
currently pointed.
Show Information - Under this submenu, you may check local time, local sidereal time,
hardware, firmware and database version of the SynScan hand control. If the hand control is
connected to the mount, this menu will also display the firmware of motor control board.
Park Scope - This moves the telescope to the Home position or parks the telescope at the
current or previously stored parking position.
PAE - Pointing Accuracy Enhancement function.
Clear PAE data - This allows you to clear all PAE data.
GPS - This allows you to obtain information from the SynScan GPS receiver.
S
etup Functions
Auto Tracking - This feature allows for quick tracking of a celestial object while the hand
control displays the coordinates the telescope is curretnly pointed at. If the star alignment
procedure has already been performed, you can activate the AutoTracking mode any time. If
not, make sure that the location and time have been properly entered. Before choosing the
Auto Tracking mode, position the telescope so that the tube is level and pointed to the North.
Set Slew Limits - Allows you to set the slewing limits of the mount on altitude axis. Setting
the slew limit prevents the optical tube from colliding with mount. The slew limit range is
dependent on the mount and the optical tube installed on the mount.
Handset Setting - This submenu allows adjustments of the brightness of the LCD backlit,
the darkness of the LCD lettering, the brightness of the LED backlit and the beeper volume.
Press the RIGHT or LEFT directional key to increase or decrease the value.
Factory Setting - This submenu allows you to reset the hand control to its default setting.
Daylight Savings - Allows you to change the Daylight Savings option.
Alignment - Allows you to perform the star alignment.
Alignment Stars -
The Setup functions allow you to change any system variable or information regarding location,
time, date, and alignment configurations. To access the Setup Functions, either press SETUP key
on the key pad or scroll to SETUP under menu option using the scroll keys. Below lists the
different types of functions available to you, and their purposes.
Date - Allows you to change the date entered at the initial setup.
Time - Allows you to change the current time.
Observing site - Allows you to change the current location.
Sid. Rate: This activates tracking in Sidereal rate (Dual Axes Tracking).
Lunar Rate: This activates tracking in Lunar rate (Dual Axes Tracking).
Solar Rate: This activates tracking in Solar rate (Dual Axes Tracking).
Stop Tracking: This stops the tracking instantly.
Auto Select - When this option is chosen, the hand control will filter out the star not
suitable for star alignment.
Sort by - This allows the hand control to generate a list of alignment stars and display
them alphabetically or by their magnitude.
Backlash - This feature allows you to insert a value for each axis to compensate for its
backlash. For better pointing accuracy, it is important that the backlash value is set to be
equal or greater than the real amount of backlash between the gears. The default setting of
the backlash is 0 d 00' 00" (0 degree, 0 arcmin. and 0 arcsec.). Use the numeric keys to
enter the desired value and press the RIGHT directional key to move the cursor to the next
digit. First set the value for R.A. Press ENTER to proceed to Dec.
Tracking