Rite-Ride 2071 - Manual (Page 5)

(2) 3/8"
SPECIAL
(2) 3/8" SPECIAL FLAT WASHERS
ADDED BETWEEN BRACKET AND
FRAME DEPRESSION TO ASSURE
BRACKET SQUARENESS
(2) 3/8" SPECIAL FLAT WASHERS
ADDED BETWEEN BRACKET AND
FRAME DEPRESSION TO ASSURE
BRACKET SQUARENESS
2701
NOTICE
: 1994 and later Dodge four wheel drive
pickups have a splash guard inside the wheel well
that will need to be trimmed away as shown in the
figure below. This must be done in order to expose
the frame rail and allow for the installation of the
upper brackets.
Note:
All the dimensions shown are in inches.
(SEE OTHER SIDE OF PAGE)
Installation of this kit on 1994 and
later Dodge pickups may require
(2) 3/8" special washers be used
in the frame depression to assure
the upper bracket is positioned
squarely. The other three bracket
mounting holes will locate on the
frame surface as shown.
Note:
The frame depression may be on the upper
or bottom half of the frame rail. If your vehicle has
an indention on the upper half of the frame use the
special flat washers as shown in the illustration
directly above.
21-3582-8153 06-11 NDD-4260-1
NOTICE:
KIT INSTALLATION ON 1994 AND LATER DODGE PICKUPS
Driver’s
Side
View
5.0
2.5
15.0