Richter BVIP/F Series Ball Valves (ISO/DIN) - Manual (Page 3)

Series BVI/F, BVIP/F
Page 3
9520-090-en Revision 10
TM 8361 Edition 10/2011
Relevant documents
Declaration of conformity acc. to the EC Pressure
Equipment Directive 97/23/EG
Manufacturer’s Declaration German Clean Air Act
(TA-Luft)
Manufacturer’s Declaration SIL
Form for Safety Information Concerning the
Contamination QM 0912-16-2001_en
For BVIP/F: Operating manual for actuator
Depending on option, relevant drawing:
Lever elevation Sect. 9520-00-3010
Dim. 9520-00-4020
Limit switch IFM Sect. 9520-00-3005
Dim. 9520-00-4015
Limit switch VDE/VDI Sect. 9520-00-3006
Dim. 9520-00-4016
Spring return unit Kinetrol 9520-00-3004
Initiator Turck Sect. 9520-00-3007
Dim. 9520-00-4017
Locking plate 9520-00-3002
Connecting dimensions for actuator
Dim. 9520-00-4179
1 Technical data
Manufacturer:
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone: +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail: [email protected]
Internet: http://www.richter-ct.com
Designation :
Standard ball valve with one-piece ball/stem unit or
ceamic ball and stem, with plastic coating, cone shape
stem sealing, seat rings of pure PTFE, cavity reduced
as standard feature, two-piece body.
Series:
BVI/F
Design with lever or hand gear
BVIP/F /F Design prepared for pneum., hydr.
or electric actuator to ISO 5211
Certified to German Clean Air Act (TA Luft)
Strength and tightness (P10, P11) of the pressure-
bearing body tested to DIN EN 12266-1.
Gas-tight (P12) in the seat to DIN EN 12266-1,
leak rate A
Face to face:
DIN EN 558-1 basic series 1, ISO 5752 series 1
Flange connecting dimensions:
DIN EN 1092-2, type B (ISO 7005-2, type B) PN 16
or flanges drilled to ASME 16.5, Class 150
Materials :
Body material: Ductile cast iron EN-JS 1049 /
ASTM A395
Lining material: PFA/PTFE .../F
Temperature range :
See pressure-temperature diagram in Section 1.5.
Operating pressure:
from vacuum to max. 16 bar
See pressure-temperature diagram in Section 1.5.
Ball valve sizes in inch :
DN 25, 40, 50, 80, 100, 150
Installation position :
Arbitrary, with an additional relief bore in the ball/stem
units or ceramic balls a direction arrow indicates the
direction of flow. See Section 5.2.
Weight, BVI/F manually operated:
Nom.
size
25 40 50 80 100 150
ca. kg 5,5 12 14 30 46 86
For weight of actuator, see actuator manufacturer's manual.
Dimensions and individual parts:
See sectional drawings in Section 9.
Wear parts: Seat rings
Cone shape stem sealing
Ball/stem unit
Ball and stem
Options :
Lever elevation depending on requirements.
Limit switches
for remote monitoring of hand and remote-
activated ball valves.
Lockable hand lever
to prevent unauthorised operation.
B7M screws
Set rings TFM, PTFE carbon
Hand gear
Al
2
O
3
ball or ball/stem unit with additional relief
bore