Revel IC6T2 - Manual (Page 8)

Paint Shield
8 Revel Concerta IW65/IW80 & IC65/IC80/IC6T2
Owner’s Manual
CAUTION!
Be sure to comply with
local wiring codes. Harman
International Industries,
Incorporated, is not responsible
for any damages or injuries
that may result from faulty
wiring.
MAXIMUM WIRE GAUGE
Gauge Length Length
(AWG) (Feet) (Meters)
6 87 27
7 69 21
8 58 18
9 43 13
10 34 10
11 27 8
12 22 7
13 17 5
14 14 4
15 11 3
16 9 3
17 7 2
18 5 2
NEW CONSTRUCTION
If you wish to preinstall a rough-in bracket before the
drywall is installed, you will need to purchase the correct
rough-in bracket kit for your loudspeaker model. Detailed
instructions are supplied with the rough-in kit.
INSTALLATION
IW65/IW80 IN-WALL
To add the IW65/IW80 in-wall loudspeakers to finished
construction, proceed with the following instructions.
CAUTION!
Ensure that all audio-system
power is off before beginning
the installation.
1. Remove the plastic
paint shield from the
speaker frame.
2. Determine the correct
speaker location and
use the template
included in the packing
materials and a level
to mark the drywall.
Always allow at least
a 1/2" between the
wall stud and the
speaker cutout or the locking tabs will not have the
space to swivel into place.
3. Ensure that the drywall, plywood or other appropriate
wallboard is at least a 1/2" thick and capable of
withstanding the weight of the speaker being installed.
Cut the drywall along the speaker template marks
made in Step 2.
Level
Template
≥1/2"
≥1/2" ≥1/2"